top of page

ISONIC RADIUS-Scan software application was created for the inspection of the inner radius areas of various cornered parts made of composites, metals, etc using Linear Array Probes equipped withspecially designed wedges contoured according to the inner corner surface

This inspection software option is available for the ISONIC 3510ISONIC 2010, and ISONIC 2009 UPA Scope instruments and featured with:

  • Built-In Corner Shape Geometry Editor and Ray Tracer - Scanning Pattern (Scan Plan) Design
  • 0-Deg-Corner-Scan Cross Sectional Coverage
  • Intuitive Image Guided PA Pulser Receiver with Beam Forming View
  • True-To-Geometry Corner Cross Section Overlay Volume Corrected Imaging - Cross Sectional and Top (C-Scan)- / Side- / End- View and 3D through 0-deg Cross Sectional Coverage and line scanning along the part (stringer) either encoded or time based
  • DAC / TCG Data / Image Normalization
  • Independent on TCG Gain Per Focal Law Correction
  • 100% Raw Data Capturing
  • Automatic Defects Alarming Upon C-Scan Acquisition Completed
  • Automatic Creation of Editable Defects List
  • Comprehensive Postrpocessing Toolkit Including:
    • Recovery and Evaluation of the Captured A-Scans from the Recorded Cross Sectional Views (0-Deg-Corner-Scan) and C-Scans
    • Recovery of the Cross Sectional Views from the Recorded C-Scans
    • Converting Recorded C-Scans or their Segments into 3D Images
    • Off-Line Gain Manipulation
    • Off-Line DAC Normalization of the Recorded Images / DAC Evaluation
    • Numerous Filtering / Reject Options ( by Geometry / Position / By Amplitude db-toDAC / etc ) and Regeneration of the Corresponding of Editable Defects List and Storing it into a Separate FIle
    • Defects Sizing
    • Automatic creating of inspection reports - hard copy / PDF File


bottom of page